Yokogawa µR20000 - Manual (Page 200)

9-17
IM 04P02B01-01E
Operat
ons
Related
to
the
Computat
on
Funct
on
(/M1
Opt
on)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
9.9 Turnng Trend Recordng (Dot Model) and
Perodc Prntout (Includng the Prntout Usng
the TLOG Tmer) ON/OFF for Each Channel
This section explains the details of setting the trend recording and periodic printout for
each computation channel.
The following settings can be entered for each channel.
• Turn trend recording ON/OFF (dot model only).
• Turn the printing of computed values ON/OFF during periodic printout.
Procedure
1. Hold down the MENU key for 3 seconds to enter Setting mode.
2. Press the key or SHIFT + key to select Math and then press the key.
3. Press the key or SHIFT + key to select Aux and then press the key.
4. Press the key or SHIFT + key to select Prnt out and then press the key.
5. Set each item and press the key.
Use the key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6. When the Settng complete screen appears, do either of the following:
Press the key to set other channels.
If you are done, press the
ESC key.
7. Hold down the MENU key for 3 seconds to return to Operation mode.
Set the channel range.
The new setting takes effect.
ESC/?
Turn trend recording On/Off.
Select whether to print the computed
values during periodic printout and
printout using the TLOG timer (On/Off).
(Dot model)
Last channel First channel
0A-0A Channel
Setting complete
Set=Math
Math=Aux
Aux=Print out
Trend=On
Periodic=On
CH=0A-0A
Explanaton
Perodc Prntout
On: Prints the computed values (instantaneous values or report data) of the specified
channel during periodic printout.
Off: Does not print the channels and computed values during periodic printout.