Yokogawa µR20000 - Manual (Page 38)

IM 04P02B01-01E
For the procedure to set the functions, see section 1.10, “Function Setup Guide.”
1-22
1.4 Recordng
Header Prntout (/BT1 Opton)
When recording is started, the Start printout is performed, and recording starts. During
trend recording, you can print out messages (up to 5) that include measured values.
*
When recording is stopped, End printout is performed.
1. Chart paper feed
2. Start printout
3. Recording start
(Record start)
Operation
(Operation
instruction)
1. Recording stop
2. End printout
3. Chart paper feed
(Recording stop)
Message printout 1
including measured
values*
(Message printout 1)
Message printout 2
including measured
values*
(Message printout 2)
• Example Prntout (Dot Model)
Message printout 2 including measured
values *
Message printout 1 including measured
values *
Start printout
Comment
Batch name (batch number and lot number)
date/time, and chart speed
End printout
Comment
Batch name (batch number and lot number)
date/time, and chart speed
* Computed values can also be included on models with the /M1 option.
The printout examples may appear differently from the actual printout as a result of
functional improvements.
Start Prntout and End prntout
When recording starts, “Start printout” or “Start printout 2” prints. Also, when recording
stops, “End printout” or “End printout 2” prints.
Prntout/Operaton Descrpton Notes
Comment Prints 64 characters x 5 lines or less.
Batch name Can be displayed in the main display.
Batch number Prints up to 26 characters.
Lot number Prints a number from 4-digits or 6-digits. You can automatically increment by 1
when recording stops.
Date/time The date format prints out according to the date
printout/display format.
Date and time cannot be turned
On/Off independently.
Chart speed Prints the current chart paper feed speed.
Chart paper feed Feeds the chart paper 50 mm or less before Start printout. Steps of 1 mm
Feeds the chart paper 50 mm or less after End printout.
Steps of 1 mm
Ejection of pen offset
compensating data
You can record the portion of the data that remains after
recording stops. Also, when recording the remaining
portion of the data, you can change the chart speed to
450 mm/h (fixed).
When pen offset compensating is On
(pen model).
You can select whether to print out the batch name, date/time, and chart speed. By
default, the printout is enabled.