22 enabling/disabling the customized menu, 22 enabling/disabling the customized menu -35, 22 enablng/dsablng the customzed menu – Yokogawa µR20000 User Manual
Page 172: App index, Enablng the customzed menu
7-35
IM 04P02B01-01E
Setup
Operat
ons
for
Chang
ng/Add
ng
Funct
ons
(Bas
c
Sett
ng
Mode)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
7.22 Enablng/Dsablng the Customzed Menu
When the Customized Menu is enabled, the following changes can be made. This
function is available on version 1.31 or later.
• Hide specified menu items from the FUNC key menu.
• Hide specified Setting mode menu items.
• Lock Basic Setting mode.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Procedure
Enablng the Customzed Menu
Changng the Settngs
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the
and
keys simultaneously for 3 seconds to enter Basic
Setting mode.
3.
Press the
key or
SHIFT +
key to select
Cust. menu and then press the
key.
4.
Set each item and press the key.
Use the
key or
SHIFT +
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the
Settng complete screen appears, do either of the following:
To correct the setting the key.
If you are done, press the
ESC key.
Basic=Cust. menu
P_Adj=Off
Basic Cust. menu
Setting complete
Select Use to enable the customized
menu.
Set the password.
Select whether to use pen/dot printing
position adjustment without the
password. Select On or Off.
The new setting takes effect.
ESC/?
Cust. menu=Use
Password=
(Displays the following when the
Cust. menu is set to Use)
Applyng the Changes and Returnng to Operaton Mode
Press the
key or
SHIFT +
key to select
End and then press the key. Press
the
key to select
Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select
Abort and press the key, the
changes are discarded, and the screen returns to Operation mode. Press the
ESC key to
return to the
Basc= screen.