16 changing the time printout format, 16 changing the time printout format -25, 16 changng the tme prntout format – Yokogawa µR20000 User Manual
Page 162: App index
7-25
IM 04P02B01-01E
Setup
Operat
ons
for
Chang
ng/Add
ng
Funct
ons
(Bas
c
Sett
ng
Mode)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
7.16 Changng the Tme Prntout Format
This section explains the details of changing the time printout format of alarm printout,
message printout, recording start printout, and new chart speed printout.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Procedure
Changng the Settngs
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the
and
keys simultaneously for 3 seconds to enter Basic
Setting mode.
3.
Press the
key or
SHIFT +
key to select
Personalze and then press the
key.
4.
Press the
key or
SHIFT +
key to select
Tme prnt and then press the
key.
5.
Set each item and press the key.
Use the
key or
SHIFT +
key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the
ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
6.
When the
Settng complete screen appears, do either of the following:
To correct the setting, press the key.
If you are done, press the
ESC key.
Select the time printout format of the
alarm printout.
Select the time printout format of the
message printout.
Select the time printout format of the
recording start printout.
The new setting takes effect.
Select the time printout format of the
new chart speed printout.
ESC/?
Mode=Time print
Alarm=HH:MM
Message=HH:MM
RCD On=HH:MM
C. Speed=HH:MM
Personalize
Setting complete
Basic=Personalize
Applyng the Changes and Returnng to Operaton Mode
Press the
key or
SHIFT +
key to select
End and then press the key. Press
the
key to select
Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select
Abort and press the key, the
changes are discarded, and the screen returns to Operation mode. Press the
ESC key to
return to the
Basc= screen.