Yokogawa µR20000 - Manual (Page 148)

7-11
IM 04P02B01-01E
Setup
Operat
ons
for
Chang
ng/Add
ng
Funct
ons
(Bas
c
Sett
ng
Mode)
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
Applyng the Changes and Returnng to Operaton Mode
Press the key or SHIFT + key to select End and then press the key. Press
the key to select Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select Abort and press the key, the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basc= screen.
Explanaton
CH/Tag
Channel: Prints the channel number.
Tag: Prints the tag.
Channel (Dot Model)
When On is selected channel number or tag is printed by the trend recording.
Alarm
On1: Prints the alarm information when an alarm occurs or releases.
On2: Prints the alarm information only when an alarm occurs.
Off: Does not print alarm information.
Pen Color Prntout (Pen Model)
When On is selected, the recording color of the channel whose scale is printed is printed.
This is valid on channels whose scale printout is turned On.
Note
Channel, alarm, recording start, and new chart speed printouts are not performed when the
chart speed is greater than or equal to 1600 mm/h on the pen model, greater than or equal to
101 mm/h on the 6-dot or 12-dot model, and greater than or equal to 51 mm/h on the 18-dot or
24-dot model.
7.7 Turnng Prntouts ON/OFF