Yokogawa µR20000 - Manual (Page 183)

IM 04P02B01-01E
8-4
Procedure
Dsplay n Whch Dfferent Screens Can Be Assgned to the Top and
Bottom Sectons (Top: 2-Channel Dgtal Dsplay, Bottom: Date/Tme)
1. Hold the MENU 1 key for 3 seconds to show the data display setup screen.
2. Press the key or SHIFT + key to select the screen number and then
press the key.
A sample screen of the display type appears. A section of the display blinks to indicate that
this is a data display setup screen.
3. Press the or SHIFT + key to switch the display. Select the display in
which different screens can be assigned to the top and bottom sections (display in
which UP and DW are shown at the left edge) and press the key.
4. Set the display type for the top section.
Press the key or SHIFT + key to select 2CH digital display, and then
press the key.
Set the channel switching interval and other settings.
5. Set the display type for the bottom section.
Press the key or SHIFT + key to select date/time, and press the key.
6. When the Settng complete screen appears, press the key.
Hold the MENU 1 key down for 3 seconds to exit from the data display setup screen.
Select the display type.
Select the channel switching interval.
In this example, select Manual.
Select the channel to be displayed
at the left.
Select the channel to be displayed
at the right.
Select the display type of the
bottom section.
Display type of the bottom section
Select the display type.
Display type of the top section
Select the screen No.
Current display type name.
The new setting takes effect. Screen 02
Setting complete
Screen number=02
Upper kind=
01 2000.0 mV 02 2000.0
Upper interval=Manual
Upper: Left=01 Right=0
UP: 01 200.0 mV
DW: 2005/01/01 00:00
Upper: Left=01 Right=0
Lower kind=
2005/01/01 00:00:00
Explanaton
Dsplay n Whch Dfferent Screens Can Be Assgned to the Top and
Bottom Sectons
You can select the display type (see page 12-12) for the top and bottom sections.
Interval:
See “Interval” on the previous page.
8.2 Changng the Dsplayed Informaton