Yokogawa µR20000 - Manual (Page 229)

12-1
IM 04P02B01-01E
Spec
fcat
ons
1
2
3
4
5
6
7
8
9
10
11
12
App
Index
12.1 Input Specfcatons
Number of Inputs and Scan Interval on the Pen Model
Item Specfcatons
Number of inputs 1, 2, 3, or 4
Scan interval 125 ms
Number of Inputs and Scan Interval on the Dot Model
Item Specfcatons
Number of inputs 6, 12, 18, or 24
Scan interval Integraton tme of
the A/D converter 20 ms/16.7 ms 100 ms
Model
6 dot 1 sec 2.5 sec
12 dot 2.5 sec 5 sec
18 dot 2.5 sec 10 sec
24 dot 2.5 sec 10 sec
Input Type
Item Specfcatons
Input type DC voltage, 1-5V, TC, RTD, DI (ON/OFF input), DC current (by adding an external shunt resistor)
Input Range and Measurable Range
Input Range Type Measurable Range
Volt 20 mV –20.00 to 20.00 mV
60 mV –60.00 to 60.00 mV
200 mV –200.0 to 200.0 mV
2 V –2.000 to 2.000 V
6 V –6.000 to 6.000 V
20 V –20.00 to 20.00 V
50 V –50.00 to 50.00 V
1-5V (0.800 to 1.200 V range) to (4.800 to 5.200 V range)
TC R 1 0.0 to 1760.0°C 32 to 3200°F
S 1 0.0 to 1760.0°C 32 to 3200°F
B 1 0.0 to 1820.0°C 32 to 3308°F
K 1 –200.0 to 1370.0°C –328 to 2498°F
E 1 –200.0 to 800.0°C –328.0 to 1472.0°F
J 1 –200.0 to 1100.0°C –328.0 to 2012.0°F
T 1 –200.0 to 400.0°C –328.0 to 752.0°F
N 1 0.0 to 1300.0°C 32 to 2372°F
W 2 0.0 to 2315.0°C 32 to 4199°F
L 3 –200.0 to 900.0°C –328.0 to 1652.0°F
U 3 –200.0 to 400.0°C –328.0 to 752.0°F
WRe 4 0.0 to 2400.0°C 32 to 4352°F
RTD PT (Pt100) 5 –200.0 to 600.0°C –328.0 to 1112.0°F
JPT (JPt100) 5 –200.0 to 550.0°C –328.0 to 1022.0°F
DI Level 0: Less than 2.4 V, 1: Greater than or equal to 2.4 V
Within ±6 V
Contact 0: Open, 1: Closed
1 R, S, B, K, E, J, T, N: IEC584-1 (1995), DIN IEC584, JIS C1602-1995
2 W: W-5% Re/W-26% Re (Hoskins Mfg. Co.), ASTM E988
3 L: Fe-CuNi, DIN43710, U: Cu-CuNi, DIN43710
4 WRe: W-3%Re/W-25%Re (Hoskins Mfg. Co.)
5 Pt100: JIS C1604-1997, IEC751-1995, DIN IEC751-1996
JPt100: JIS C1604-1989, JIS C1606-1989
Measurement current: i = 1 mA (Pt100, JPt100)
Chapter 12 Specfcatons