3 setting the unit on scaled channels, 3 setting the unit on scaled channels -12, 3 settng the unt on scaled channels – Yokogawa µR20000 User Manual

Page 113

IM 04P02B01-01E

5-12

5.3 Settng the Unt on Scaled Channels

Units are set on channels whose input range is set to Scaling, 1-5V, or SQRT.

Procedure

Hold down the

MENU

key for 3 seconds to enter Setting mode.

Press the

key or

SHIFT +

key to select

Unt and then press the key.

Set each item and press the key.

Use the

key or

SHIFT +

key to select values.

For the procedure on how to enter values or characters, see section 4.2.
If you press the

ESC key in the middle of the operation, the settings entered up to

then are cancelled, and the display returns to a higher level menu.

When the

Settng complete screen appears, do either of the following:

Press the key to set other channels.
If you are done, press the

ESC key.

Hold down the

MENU

key for 3 seconds to return to Operation mode.

Set the unit.

Set the channel range.

The new setting takes effect.

First channel

Last channel

ESC/?

Set=Unit

CH=01-01

Unit=

01-01 Channel

Setting complete

Explanaton

Characters That Can Be Used for Unts

A unit is set using up to six characters.
The available characters are as follows:
Alphabet, numbers, symbols (%, #, °, @, +, –, *, /, (, ), µ, Ω,

, .), and space