2 setting the alarm, 2 setting the alarm -9, 2 settng the alarm – Yokogawa µR20000 User Manual

Page 110

5-9

IM 04P02B01-01E

Frequently

Used

Setup

Operat

ons
(Sett

Mode)

App

Index

5.2 Settng the Alarm

The alarm is set for each channel.
If you change the input range, set the alarm again.

Procedure

Hold down the

MENU

key for 3 seconds to enter Setting mode.

Press the

key or

SHIFT +

key to select

Alarm and then press the

key.

Set each item and press the key.

Use the

key or

SHIFT +

key to select values.

For the procedure on how to enter values or characters, see section 4.2.
If you press the

ESC key in the middle of the operation, the settings entered up to

then are cancelled, and the display returns to a higher level menu.

When the

Settng complete screen appears, do either of the following:

Press the key to set other channels.
If you are done, press the

ESC key.

Hold down the

MENU

key for 3 seconds to return to Operation mode.

Select the level number between 1 and 4.

Select On to set the alarm.

When set to On, the settings below can be

entered.

Set the channel range.

Select the alarm type.

Select the value used to turn On the alarm.

Turn relay On when outputting alarms on

the relay. This setting is valid only on

models with the /A1, /A2, /A3, /A4, or /A5

option.
Specify the alarm relay No.

The new setting takes effect.

ESC/?

Set=Alarm

CH=01-01

Alarm=Off

Type=H

Value= 1.000

Relay=Off

01-01 CH/level 1

Setting complete

First channel

Last channel

Relay number=I01

Level=1