IAI America XSEL-KE User Manual
Page 62
47
Part 1 Installation
5) As shown at left, use small screwdrivers to
remove the segment board. The segment
board is joined to connectors at three
locations. Disconnect one by one the
locations joined to connectors and remove
the segment board.
6) Remove the screws mounting the main CPU
board.
7) As shown at left, use small screwdrivers to
remove the main CPU board. (The main CPU
board is sandwiched between the enclosure
guides.)
8) Replace the battery located in the position
shown by an arrow in the figure at left.
Battery
Locations
joined to
connectors