IAI America PCON-CFA - Manual (Page 98)

3. PCON-CA/CF
A
92
x PCON-CA/CFA
output
o PLC input side (* n indicates the node address of each axis.)
PCON-CA/CFA DO and output data register
Remote I/O mode
Position/simple
direct mode
Half direct mode Full direct mode
Remote I/O mode
2 PLC input area
(channel) Number of
occupied
channels: 1CH
Number of
occupied
channels: 4CH
Number of
occupied
channels: 8CH
Number of
occupied
channels: 16CH
Number of
occupied
channels: 6CH
n
Port number 0 to
15
Port number 0 to
15
n+1
Current position Current position Current position
Occupied area
n+2
n+3
Completed
position number
(simple alarm ID)
n+4 Status signal
Command current Command current Current position
n+5
n+6
Current speed Current speed Command current
n+7 Alarm code Alarm code
n+8 Status signal
n+9
Occupied area
n+10
n+11 Total moving
count
n+12
n+13 Total moving
distance
n+14 Status Signal 1
n+15 Status Signal 2
(Note) The areas denoted by “occupied area” are occupied according to the operation mode setting.
These areas cannot be used for any other purpose. Also exercise caution to avoid node address
duplication.