IAI America PCON-CFA - Manual (Page 18)

2. ACON-C/CG,
PCON-C/CG
12
ᲣᲟᲖᱳ
Flat cable
Communication
cable
[4] Full direct mode: In this mode, the actuator is operated by specifying all values relating to position control
(target position, speed, acceleration/deceleration, etc.) directly as values.
Number of occupied bytes: 16CH
[5] Remote I/O mode 2: In this mode, the actuator is operated by PIOs (24-V I/Os) via DeviceNet
communication.
The current-position and command-current read functions are available in addition to
the functions provided in mode [1].
Number of occupied bytes: 6CH
Target position: 100.00 mm
Positioning band: 0.10 mm
Speed specification:
100.0 mm/sec
Acceleration: 0.30 G
Deceleration: 0.30 G
Push current: 50%
Load current threshold: 0
Zone+: 50.00 mm
Zone-: 30.00 mm
ACON/PCON supporting
DeviceNet
Actuator
PLC PLC
ACON/PCON not
supporting DeviceNet
ACON/PCON supporting
DeviceNet
DeviceNet connection PIO connection