ALLIED Vision Technologies Pike F-1600 - Manual (Page 357)

Configuration of the camera
PIKE Technical Manual V5.1.2
357
Quick parameter change timing modes
You can choose between the following update timing modes:
• Standard Parameter Update Timing (slightly modified from previous PIKE
cameras)
• New: Quick Format Change Mode
Standard Parameter Update Timing
The camera behaves like older firmware versions without this feature. The
UpdActive flag has no meaning.
Quick Format Change Mode
This mode behaves like Standard Parameter Update Timing mode with the fol-
lowing exception:
An already started image transport to the host will not be interrupted, but an
already started integration will be interrupted.
Note

For a detailed description see Chapter Quick parameter change
timing modes on page 184.
Register Name Field Bit Description
0xF1000570 PARAMUPD_TIMING Presence_Inq [0] Indicates presence of this feature
(read only)
--- [1..5] Reserved
UpdActive [6] Update active
see Chapter Encapsulated Update
(begin/end) on page 186
0: (default); reset to 0 means

Encapsulated Update end
1: set to 1 means

Encapsulated Update begin
--- [7..23] Reserved
UpdTiming [24..31] Update timing mode
If set to O:

Standard Parameter Update Timing
is active
If set to 2:

Quick Format Change Mode is active
Table 178: Advanced register: Update timing modes