ALLIED Vision Technologies Pike F-1600 - Manual (Page 354)

Configuration of the camera
PIKE Technical Manual V5.1.2
354
High SNR mode (High Signal Noise Ratio)
With High SNR mode enabled the camera internally grabs GrabCount images
and outputs a single averaged image.
Note

When SOFT_RESET has been defined, the camera will respond
to further read or write requests but will not process them.
Register Name Field Bit Description
0xF1000520 HIGH_SNR Presence_Inq [0] Indicates presence of this feature
(read only)
--- [1..5] Reserved
ON_OFF [6] High SNR mode on/off
The camera must be idle to toggle
this feature on/off. Idle means: no
image acquisition, no trigger.
Set grab count and activation of
HighSNR in one single write
access.
--- [7..22] Reserved
GrabCount [23..31] Number of images (min. 2)
2
n
images with n=1..8 (automati-
cally)
Table 175: Advanced register: High Signal Noise Ratio (HSNR)
Note

• The camera must be idle to toggle this feature on/off.
Idle means: no image acquisition, no trigger.
• Set grab count and activation of HighSNR in one single
write access.