One-push white balance – ALLIED Vision Technologies Pike F-1600 User Manual
Page 141
Description of the data path
PIKE Technical Manual V5.1.2
141
The increment length is ~0.0353 dB/step.
One-push white balance
The camera automatically generates frames, based on the current settings of all
registers (GAIN, OFFSET, SHUTTER, etc.).
For white balance, in total 9 frames are processed. For the white balance algo-
rithm the whole image or a subset of it is used. The R-G-B component values of
the samples are added and are used as actual values for the one-push white
balance.
Note
While lowering both U/B and V/R registers from 284 towards 0,
the lower one of the two effectively controls the green gain.
Figure 73: U/V slider range
Type
Range
Range in dB
Pike color cameras
0 ... 568
10 dB
Table 43: Manual range of U/B and V/R for the various Pike types
Note
Configuration
To configure this feature in control and status register (CSR):
See