ALLIED Vision Technologies Pike F-1600 User Manual
Page 101
Specifications
PIKE Technical Manual V5.1.2
101
Smart functions
AGC (auto gain control), AEC (auto exposure control), real-time shad-
ing correction, LUT, 256 MByte image memory, mirror, binning, sub-
sampling, High SNR, storable user sets
only color: AWB (auto white balance), color correction, hue, satura-
tion, sharpness
Two configurable inputs, four configurable outputs
RS-232 port (serial port, IIDC V1.31)
Transfer rate
100 Mbit/s, 200 Mbit/s, 400 Mbit/s, 800 Mbit/s
Digital interface
IEEE 1394b (IIDC V1.31), 2 x copper connectors (bilingual) (daisy
chain)
fiber: IEEE 1394b, 2 connectors: 1 x copper (bilingual), 1 x GOF con-
nector (2 x optical fiber on LCLC), (daisy chain)
Power requirements
DC 8 V - 36 V via IEEE 1394 cable or 12-pin HIROSE
Power consumption
Typical single-tap: 6.25 W (@ 12 V DC);
fiber: typical 6.75 W (@ 12 V DC)
Typical dual-tap: 6.5 W (@ 12 V DC);
fiber: typical 7.0 W (@ 12 V DC)
Dimensions
142.8 mm x 59 mm x 59 mm (L x W x H); incl. connectors, without tri-
pod and lens
Mass
380 g (without lens)
Operating temperature
+ 5 °C ... + 50 °C housing temperature (without condensation)
Storage temperature
- 10 °C ... + 70 °C ambient temperature (without condensation)
Regulations
CE, FCC Class B, RoHS (2002/95/EC)
Standard accessories
b/w: protection glass
color: IR cut filter
Optional accessories
b/w: IR cut filter, IR pass filter
color: protection glass
On request
Host adapter card, angled head, power out (HIROSE)
Software packages
Various SKDs with interfaces to ActiveX, DirectShow or Twain (free
charge)
Note
The design and specifications for the products described above
may change without notice.
Feature
Specification
Table 22: Specification PIKE F-1600B/C (fiber)