ALLIED Vision Technologies Pike F-1600 - Manual (Page 353)

Configuration of the camera
PIKE Technical Manual V5.1.2
353
You can save the current value in the user sets and set to default value.
Soft reset
The soft reset feature is similar to the INITIALIZE register, with the following
differences:
• 1 or more bus resets will occur
• the FPGA will be rebooted
The reset can be delayed by setting the Delay to a value unequal to 0.
The delay is defined in 10 ms steps.
0xF1000434 ADV_CHN_ADJ_OFFSET+1 --- [0..15] Reserved
Offset_Value [16..31] Signed 16-bit value

-255...0...+256

SmartView shows only:

-255...0...+255
Note: Direct register access.
up to +256 whereas
SmartView: up to +255)
Note

Doing the dual-tap offset adjustment in SmartView: Refer to
the FirePackage/FirePackage64 SmartView Manual.
Register Name Field Bit Description
0xF1000510 SOFT_RESET Presence_Inq [0] Indicates presence of this
feature (read only)
--- [1..5] Reserved
Reset [6] Initiate reset
--- [7..19] Reserved
Delay [20..31] Delay reset in 10 ms steps
Table 174: Advanced register: Soft reset
Register Name Field Bit Description
Table 173: Advanced register: Dual-tap offset adjustment