Defect pixel editor in smartview, Chapter – ALLIED Vision Technologies Pike F-1600 User Manual
Page 166
Description of the data path
PIKE Technical Manual V5.1.2
166
Defect pixel editor in SmartView
With AVT SmartView 1.13 or greater you can edit the defect pixels directly in the
camera (Adv 4 tab).
Starting the camera or SmartView does not initiate the download of the defect
pixel list.
To download the defect pixel data from the camera into SmartView defect pixel
editor: open the defect pixel editor dialog (Adv4 tab, see screenshot below).
Features:
•
Upload from AVT SmartView to the camera.
•
Download from the camera to AVT SmartView.
Info
We strongly recommend to make a backup of the factory
default settings. Therefore save the defect pixel map (stored in
the camera) into a csv file, before making any changes.
If you delete one or several pixels (or if you make any
manipulations of the defect pixel list), you will loose the
original defect pixel list.
Figure 85: AVT SmartView: Adv 4 tab: Defect pixel correction