ALLIED Vision Technologies Pike F-1600 - Manual (Page 334)

Configuration of the camera
PIKE Technical Manual V5.1.2
334
Maximum resolution
This register indicates the highest resolution for the sensor and is read-only.
Time base
Corresponding to IIDC, exposure time is set via a 12-bit value in the correspond-
ing register (SHUTTER_INQ [51Ch] and SHUTTER [81Ch]).
This means that you can enter a value in the range of 1 to 4095.
PIKE cameras use a time base which is multiplied by the shutter register value.
This multiplier is configured as the time base via the TIMEBASE register.
The time base IDs 0-9 are in bit [28] to [31]. See Table 157: Time base ID on page
335.
Default time base is 20 μs: This means that the integration time can be changed
in 20 μs increments with the shutter control.
Note

This register normally outputs the MAX_IMAGE_SIZE_INQ
Format_7 Mode_0 value.
This is the value given in the specifications tables under
Picture size (max.) in Chapter
Specifications on page 86ff.
Register Name Field Bit Description
0xF1000200 MAX_RESOLUTION MaxHeight [0..15] Sensor height

(read only)
MaxWidth [16..31] Sensor width

(read only)
Table 155: Advanced register: Maximum resolution inquiry
Register Name Field Bit Description
0xF1000208 TIMEBASE Presence_Inq [0] Indicates presence of this fea-
ture (read only)
--- [1..7] Reserved
ExpOffset [8..19] Exposure offset in μs
--- [20..27] Reserved
Timebase_ID [28..31] See Table 157: Time base ID on
page 335.
Table 156: Advanced register: Time base