ALLIED Vision Technologies Pike F-1600 - Manual (Page 111)

Camera interfaces
PIKE Technical Manual V5.1.2
111
Camera interfaces
This chapter gives you detailed information on status LEDs, inputs and outputs,
trigger features and transmission of data packets.
IEEE 1394b port pin assignment
The IEEE 1394b connector is designed for industrial use and has the following
pin assignment as per specification:
Note

For a detailed description of the camera interfaces (FireWire,
I/O connector), ordering numbers and operating instruc-
tions see the Hardware Installation Guide, Chapter Camera
interfaces.
Read all Notes and Cautions in the Hardware Installation
Guide, before using any interfaces.
Figure 57: IEEE 1394b connector
1 2 3 4
5 6 7 8 9
Pin Signal
1 TPB-
2 TPB+
3 TPA-
4 TPA+
5 TPA (Reference ground)
6 VG (GND)
7 N.C.
8 VP (Power, VCC)
9 TPB (Reference ground)