ALLIED Vision Technologies Pike F-1600 - Manual (Page 356)

Configuration of the camera
PIKE Technical Manual V5.1.2
356
Restrictions Note the restrictions in the following table. When using software with an
Isochronous Resource Manager (IRM): deactivate it.
Operation The maximum allowed isochronous packet size can be set separately for the ISO
speeds S400 and S800. Check the associated Presence_Inq flag to see for which
ISO speed this feature is available.
Setting the Set2Max flag to 1 sets the MaxIsoSize field to the maximum sup-
ported isochronous packet size. Use this flag to query the maximum supported
size (may depend on the camera model).
Enable this feature by setting the ON_OFF flag to 1 and the MaxIsoSize field to
a value greater than the default packet size.
The camera ensures:
• that the value of the MaxIsoSize field is a multiple of 4.
• that the value isn’t lower than the value specified by the IEEE1394 specifi-
cation.
The settings are stored in the user sets.
Software Restrictions
FireGrab Deactivate Isochronous Resource Manager:

SetParameter (FGP_USEIRMFORBW, 0)
FireStack/FireClass No restrictions
SDKs using Microsoft driver
(Active FirePackage,

Direct FirePackage, ...)
n/a
Linux: libdc1394_1.x No restrictions
Linux: libdc1394_2.x Deactivate Isochronous Resource Manager:

Set DC1394_CAPTURE_FLAGS_BANDWIDTH_ALLOC flag to 0
Third Party Software Deactivate Isochronous Resource Manager
Table 177: Restrictions for feature: Maximum ISO packet size
Note

Enabling this feature will not change the MaxBytePerPacket
value automatically. The camera may not use the new
isochronous packet size for the MaxBytePerPacket value until
a write access to the desired Format_7 mode has been issued.