Hue and saturation – ALLIED Vision Technologies Pike F-1600 User Manual
Page 197
Description of the data path
PIKE Technical Manual V5.1.2
197
Hue and saturation
Pike CCD color models are equipped with hue and saturation registers.
The hue register at offset 810h allows the color of objects to be changed with-
out altering the white balance, by +/- 40 steps (+/- 10°) from the nominal per-
ception. Use this setting to manipulate the color appearance after having car-
ried out the white balance.
The saturation register at offset 814h allows the intensity of the colors to be
changed between 0 and 200% in steps of 1/256.
This means a setting of zero changes the image to black and white and a setting
of 511 doubles the color intensity compared to the nominal one at 256.
Note
Configuration
To configure this feature in feature control register: See
Note
Configuration
To configure this feature in feature control register: See
Note
Hue and saturation do not show any effect on Pike color mod-
els in the Raw8 and Raw16 format, because color processing is
switched off in all Raw formats.