ALLIED Vision Technologies Pike F-1600 - Manual (Page 23)

Introduction
PIKE Technical Manual V5.1.2
23
continued from last page
V5.0.0
[continued]
07.05.10
[continued]
New links to the new AVT website:
• Chapter Contacting Allied Vision Technologies on page 12
New measured sensitivity curves:
• Chapter Spectral sensitivity on page 102ff.
Added new CAD drawings for W90S90 and W270S90:
• Chapter Pike W90 S90 (2 x 1394b copper) on page 56
• Chapter Pike W270 S90 (2 x 1394b copper) on page 60
• Chapter Pike W90 S90 (1394b: 1 x GOF, 1 x copper) on page
57
• Chapter Pike W270 S90 (1394b: 1 x GOF, 1 x copper) on page
61
Added more information on operating system support
(Windows XP SP3, Vista SP2, Windows 7):
• Chapter Operating system support on page 46
Changed sensitivity curves for PIKE F-421B/C from Kodak KAI
4021 to Kodak KAI 4022:
• Figure 49: Spectral sensitivity of Pike F-421B on page 107
• Figure 50: Spectral sensitivity of Pike F-421C on page 107
V5.0.1 08.06.10 Minor corrections
• Added red font to Pike F-1100C and Pike F-1600C in head-
line: see Chapter
PIKE F-1100B / PIKE F-1100C on page 249
and Chapter PIKE F-1600B / PIKE F-1600C on page 251
• Added missing Pike F-100: see Chapter Dual-tap offset
adjustment with SmartView (1.10 or greater) on page 137f.
• Changed frame rates from Pike F-505 (maxBPP=1100) form
15 fps to 14 fps for RAW8 and AOI height of 2054 and 2048.
Changed all frame rates that exceeded the theoretical
frame rate of the CCD: see
Table 115: Frame rates Pike F-505
as function of AOI height [width=2452] (maxBPP=11000)
on page 271 and Chapter Specification PIKE F-505B/C
(fiber) on page 96
• Changed all frame rates that exceeded the theoretical
frame rate of the CCD: see Chapter
Frame rates Format_7 on
page 260ff.
to be continued on next page
Version Date Remarks
Table 1: Document history