Chapter, Dual-tap offset adjustment with smartview, 10 or greater) – ALLIED Vision Technologies Pike F-1600 User Manual
Page 137: Dual-tap offset adjustment with smartview (1.10, Or greater), Dual-tap offset, Adjustment with smartview (1.10 or greater)
Description of the data path
PIKE Technical Manual V5.1.2
137
The following window opens:
2.
To perform an automatic channel adjustment, click on Do one-push
adjustment.
3.
If the adjustment is not sufficient, repeat this step or adjust by clicking
the arrow buttons.
The two channels are automatically adjusted. For the channel adjustment a
region from +/- 20 pixel around the middle vertical is taken into account.
Dual-tap offset adjustment with SmartView (1.10 or greater)
Prerequisites:
•
Lens cap
•
Test sheet with continuous b/w gradient
Figure 70: SmartView: channel adjustment (>1.5 up to 1.9.1)
Note
Program button is only available for AVT factory.
Figure 71: Example of channel adjustment: PIKE F-032B
before
after
This manual is related to the following products: