Xerox 7675 - Manual (Page 243)

241
Enable an Optional Feature
This feature is used on machines which had an optional feature installed and then disabled. This operation
allows the user to re-enable the feature.
NOTE: This section is not applicable to the USB Print Kit and the Fax Hardware Kit.
At Your Workstation
1. Open your web browser and enter the TCP/IP address of the machine. Press [Enter]
2. Click the [Properties] tab.
3. Enter the current administrator user name and password, if prompted. The default is [admin] and
[1111].
4. Select [Services].
5. Select [Service Registration].
6. Select the check box of the feature you wish to disable. (Copy, Fax (Embedded), Server Fax, Network
Scanning, Email and Internet (Fax).
7. Select Apply.