Xerox 7675 - Manual (Page 213)

211
Information Checklist
Before starting the installation procedure, please ensure the following items are available or have been
performed. Click the underlined links to display more information.
1. Ensure the machine is fully functioning on the network prior to installation.
2. Locate the Network Accounting Kit
This kit contains the Network Accounting Subscriber Installation Module (SIM) required to install the
feature. Contact your Xerox Sales Representative if you do not have the plastic SIM.
3. Ensure that the TCP/IP and HTTP protocols are configured on the device and fully functional
This is required to access CentreWare Internet Services to configure Network Accounting. The
Internet Services function is accessed through the embedded HTTP server on the machine and allows
System Administrators to configure settings by using an Internet browser.
To verify that the TCP/IP and HTTP protocols are correctly configured, open your web browser on a
TCP/IP enabled workstation and enter the IP address of the multifunction device into the Address field
of the browser. Press [Enter]. If the device’s Internet Services web page displays, the device is
correctly configured. If the page does not display, refer to the Read Me topic in this guide to configure
TCP/IP and HTTP.
4. Install and configure the Xerox certified network accounting solution package on your network. Refer
to the manufacturer's instructions with the network accounting package to complete this task.
5. Test communication between the accounting server and the machine. To do this:
Go to your network accounting server and open a web browser. Enter the IP address of the machine in
the location or address field. Press [Enter]. The machine’s Internet Services web page should appear.
If you do not have a web browser, test connectivity by pinging the IP address of the machine from your
network accounting server.