Xerox 7675 - Manual (Page 21)

19
Administrator Tools Password
The Administrator password is necessary to access the administrator tools function both from the machine
touch screen and CentreWare Internet Services. Access to the administrator tools is necessary to
configure the machine, network connectivity and optional settings.
Note that the Web User Interface (Internet Services) is now protected by the Administrator password, so
that you will need to log in with the User ID (default of admin) and the password (default of 1111) BEFORE
modifying any settings. After working with settings, make sure to log out by selecting admin-Logout in the
upper right corner of the Internet Services screen.
Xerox recommends that you change the Administrator password immediately after machine installation.
A password of at least 9 characters in length should be sufficient for a year. Once changed, ensure the
password is kept in a secure place for future use.
How to Change the Admin Password
At the Machine
1. Press the [Log In / Out] button to enter the Tools pathway.
2. On the keypad enter admin, then [1111] or the current password. Touch the [Enter] button when
finished.
3. Touch [Machine Status, then the [Tools] tab.
4. Touch [Security Settings].
5. Touch [Authentication].
6. Touch [User / Administrator Accounts].
7. Touch [Configure Account].
8. Touch [System Administrator (Admin)].
9. Enter a Passcode of 1 to 9 digits.
10. Touch [Save].
11. Touch [Log In / Out] to exit the Tools pathway.