Xerox 7675 - Manual (Page 217)

215
Test Network Accounting
1. Open an application and print a job. Verify that you are presented with the User ID and Accounting ID
screen.
2. Enter a valid User and Accounting ID and click [OK] (If you selected [Save Accounting Codes] it will
only be necessary to enter this information the first time the driver is used).
3. If your print job does not print, try to copy a job at the machine using the same Account and User ID. If
the copy job completes then the Account and User ID are valid.
4. It may be necessary to check the network accounting solution software or server configuration to verify
the User ID and Account ID.
5. Distribute the printer drivers with the Network Accounting option already selected (if possible). If the
printer drivers are distributed without the option enabled, workstation users will need to configure the
drivers. If the drivers are not properly configured, jobs sent to the machine will be deleted.
You have completed the Network Accounting set up.