Xerox 7675 User Manual
Page 123
121
Set Authentication to control access to individual services
1.
Click the Device Access [Configure] or [Edit] button.
2.
From the drop-down menus for each item, select the method to use to display that item to users.
3.
Click [Save] when done.
4.
Click the Service Access [Configure] or [Edit] button.
5.
From the drop-down menus for each item, select the method to use to display that item to users.
6.
Click [Save] when done.
7.
Click [Finished] on the Authentication Configuration screen when finished.
8.
Select [Logout] in the upper right corner of your screen if you are still logged in as Administrator.
Adding User Accounts at the Machine
1.
Press the [Log In / Out] button to enter the Tools pathway.
2.
On the keypad enter [admin], then [1111] or the current password. Touch the [Enter] button when
finished.
3.
If necessary, touch [Machine Status], then the [Tools] tab.
4.
Touch [Security Settings].
5.
Touch [Authentication].
6.
Touch [User / Administrator Accounts].
7.
Read the on screen instructions to configure a User Account.
8.
Touch [Configure Account], touch [User Account], enter a Passcode of 1 to 9 digits, and touch [Save].
9.
Press the [Log In / Out] button to log out as Administrator.