Yaskawa G5HHP Drive - Manual (Page 75)

4.2 Modes
4 - 7
These seven steps can be illustrated as when in Figure 4.4.
G5* Main Menu*
Operation
G5* Main Menu*
Initialize
Select Language
English
Access Level
QUICK--START
Access Level
Basic
MENU
DATA
ENTER
A1--01 = 2***
QUICK--START
A1--01 = 3
Basic
Entry Accepted
DATA
ENTER
DATA
ENTER
Fig 4.4 Changing Quick-start to Basic
J
Setting User Constants in Each Access Level
The displayed access level will change when programming mode is selected. The display will not change
for access levels in operation mode, initialize mode, autotuning mode, and modified constants mode.
This section provides the procedure to change the acceleration time to 20.0 s in each access level. The accel-
eration time (C1-01) is a user constant in programming mode.
4