Yaskawa G5HHP Drive - Manual (Page 134)

Basic Operation
6.1.8 Multi-function Input Settings: H1-01 through H1-06
6 - 16
Three-step Speed Operation Example
The following example shows three-step speed operation with frequencies set at Inverter constants.
D
Sequence
Output frequency
Forward/reverse run
command,
terminal 9 or 10
Multi-step speed reference
1, terminal 13
Multi-step speed reference
2, terminal 14
d1-01
d1-02
d1-03
OPEN CLOSED
OPEN CLOSED
OPEN CLOSED
D
Connections
VS
-
616G5
Forward Run/Stop 9
10
14
13
17
IM
U
V
W
R
S
T R
S
T
Reverse Run/Stop
Multi-step speed
reference 1
Multi-step speed
reference 2
D
User Constant Settings
Constant No. Name Setting
A1-01 Constant access level 3: Basic (B)
b1-01 Reference selection 0: Operator
d1-01 Frequency reference 1 **Hz (frequency setting)
d1-02 Frequency reference 2 **Hz (frequency setting)
d1-03 Frequency reference 3 **Hz (frequency setting)
H1-03 Multi-function input (terminal 13) 3: Multi-step speed reference 1 (factory setting)
H1-04 Multi-function input (terminal 14) 4: Multi-step speed reference 2 (factory setting)
H3-05 Multi-function input (terminal 42) 1F: Not used
Terminal 14 would not be needed if 2-step speed operation were required.
6