Yaskawa G5HHP Drive - Manual (Page 236)

Advanced Operation
7.5.5 External Terminal Functions: H
7 - 72
External Fault Input level
Detection
method
Operation
Selection
DATA
ENTER
ESC
Fig 7.35 Setting Procedure for External Fault Function
2. Press the Increment Key to switch displays as follows:
“Detection Method” → “Operation Selection” → “Input Method”
3. Press the Enter Key at the desired constant to select that constant.
At this point, the Increment and Decrement Keys can be pressed to scroll to the available settings for
the selected constant. Press the Enter Key to select the displayed constant setting.
(Press the Escape Key to cancel the operation without changing the constant setting.)
7