HEIDENHAIN ND 287 User Manual - Manual (Page 98)

98
II Installation, specifications
II – 4 Encoder par
amet
ers
II – 4 Encoder parameters
Table values
The following tables represent a partial list of HEIDENHAIN encoders.
These tables describe the operating parameters which you must set
for the encoders. Most entries can be found in the operating
instructions for your encoder.
HEIDENHAIN linear encoders
Encoder Signal period Reference marks
SPECTO ST 12/30 20 µm Single
METRO MT 60/101 10 µm Single
METRO MT 12xx/25xx 2 µm Single
CERTO CT 25xx/60xx 2 µm Single
LS 388C 20 µm Coded/1000
LS 487
LS 487C
20 µm Single
Coded/1000
LS 186
LS 186C
20 µm Single
Coded/1000
LF 183
LF 183C
4 µm Single
Coded/5000
LB 382
LB 382C
40 µm Single
Coded/2000
LC 183
LC 483
Self-configuring None
Absolute
LIDA 18x
LIDA 48x
40 µm Single
LIDA 28x 200 µm Single
LIDA 583 20 µm Single
LIF 181R
LIF 181C
8 µm Single
Coded/5000
LIF 581R
LIF 581C
8 µm Single
Coded/5000