I – 1 nd 287 position display unit – HEIDENHAIN ND 287 User Manual User Manual
Page 14

14
I Working with the ND 287 position display unit
I – 1 ND 287 position displa
y unit
I – 1 ND 287 position display unit
The ND 287 position display unit from HEIDENHAIN is designed for
measuring devices, adjustment and testing equipment, automated
tasks, as well as infeed and positioning tasks with up to two axes that
can be moved manually.
Linear/angular/rotary encoders, length gauges or analog sensors can
be connected to the ND 287. The ND 287 features two slots for the
connection of modular input assemblies:
An encoder module for connecting an incremental photoelectrical
HEIDENHAIN encoder with sinusoidal 11 µApp, 1 Vpp signals or an
absolute HEIDENHAIN encoder with bidirectional EnDat interface
(purely serial) is a standard item supplied with the position display
unit.
Optional
modules that can be easily adapted to the ND's
requirements:
Second encoder module
for connecting a HEIDENHAIN encoder
with 11 µApp, 1 Vpp or EnDat interface (purely serial) or
Analog module
for connecting an analog sensor with ±10 V
interface, primarily a temperature sensor for axis-error
compensation
Sorting and tolerance checking function with capacity for saving
the tolerances of 10 parts
The following functions are available on the ND 287:
Multilingual user guidance: Language can be selected by the user
REF reference-mark evaluation for distance-coded or single
reference marks
Display of position value (length or angle), traversing speed for
series of measurements or other measured values from analog
sensors
Distance-To-Go or Actual Value operating mode
Two datums
Scaling factor
Stopwatch
Reset or Preset function, also through external signal
Linear or non-linear error compensation for axis-error
compensation
Switching inputs and outputs
Fig. I.1
ND 287