HEIDENHAIN ND 287 User Manual - Manual (Page 33)

ND 287
33
I – 4 J
ob Set
up
Calling the JOB SETUP menu
The ND 287 offers two categories for setting up operating
parameters: JOB SETUP and INSTALLATION SETUP.
 The JOB SETUP parameters are used to accommodate specific
machining requirements for each job.
 The INSTALLATION SETUP menu is used to establish encoder,
display and communication parameters (see "INSTALLATION
SETUP menu" on page 70).
To call the JOB SETUP menu:
 Press the SETUP soft key to open the JOB SETUP menu.
When in the JOB SETUP menu, the following soft keys will be
available (see Fig. I.23):
 INSTALLATION SETUP
Press to begin accessing the INSTALLATION SETUP parameters
(see "INSTALLATION SETUP menu" on page 70).
 IMPORT/EXPORT
Operating parameter information can be imported or exported over
the serial port. (See "Serial data transfer with the Import or Export
function" on page 101). Press this soft key to call the two following
soft keys:
 Press IMPORT to download operating parameters from a PC.
 Press EXPORT to upload the current operating parameters to a PC.
 To exit, press the C key.
 HELP
This soft key will open on-line help.
Press the NAVIGATION key to move through the pages of menu
parameters. To view and change menu parameters, use the UP/
DOWN arrow key to highlight the parameter of interest and press the
ENTER key.
On the following pages you will find more information on the menu
parameters.
Fig. I.23 JOB SETUP menu
Fig. I.24 JOB SETUP menu