Console adjustment, Language, Console adjustment language – HEIDENHAIN ND 287 User Manual User Manual
Page 37: Later, see, I – 4 j ob set up
ND 287
37
I – 4 J
ob Set
up
Console adjustment
You can adjust the brightness of the ND 287's LCD display (see Fig.
I.29):
In the JOB SETUP menu, select CONSOLE ADJUSTMENT and
press the ENTER key to open the form.
Press the DECREASE or INCREASE soft key to adjust the
brightness to your requirements.
The DISPLAY SAVER setting is the amount of time the system is
idle before the LCD is turned off. The idle time may be set from 30
to 120 minutes. The display saver can be disabled during the current
power cycle by pressing the DISABLE soft key.
Language
The ND 287 supports multiple languages. To change the language:
In the JOB SETUP menu, select LANGUAGE and press the ENTER
key to open the form.
Press the LANGUAGE soft key until the desired language appears in
the LANGUAGE field.
Press ENTER to confirm your selection.
Fig. I.29 Console adjustment
You can also use the UP or DOWN arrow key to adjust the
LCD's brightness directly on the screen.
Fig. I.30 Language