Seventh line, Subsequent lines for further compensation values, Last line – HEIDENHAIN ND 287 User Manual User Manual
Page 130
130
II Installation, specifications
II – 7 Input and output of par
a
met
e
r list and er
ro
r
compensation table
Seventh line
Output of compensation value no. 0:
Subsequent lines for further compensation values
Output of compensation values 1 - 199 for linear measurements (1 -
179 for angular measurements):
Last line
Each error compensation table output ends with the final character <
# > (HEX: 0x23).
C O M P .
N 0 .
0 0 0
=
+
0 .
0 0 0 0
=
21
22
23
24
+
0 .
0 0 0 0
25
26
21
Compensation number zero, left-aligned: 13 characters
22
Separator block: 3 characters
23
Compensation position zero, right-aligned: 13 characters
24
Separator block: 3 characters
25
Compensation value zero, right-aligned: 13 characters
26
End of line: 2 characters
C O M P .
N 0 .
1 9 9
=
+
1 9 9 0 .
0 0 0 0
=
27
28
29
30
+
0 .
1 2 3 5
31
32
27
Compensation number 199, left-aligned: 13 characters
28
Separator block: 3 characters
29
Compensation position 199, right-aligned: 13 characters
30
Separator block: 3 characters
31
Compensation value 199, right-aligned: 13 characters
32
End of line: 2 characters
#
33
33
Final character and end of line: 3 characters