HEIDENHAIN ND 287 User Manual - Manual (Page 64)

64
II Installation, specifications
II – 1 Installation and electr
ical connection
II – 1 Installation and electrical
connection
Items supplied
 ND 287 position display unit with the following connections:
 An encoder module
for connecting a HEIDENHAIN encoder with
11 µApp
, 1 Vpp or EnDat (purely serial) interface for axis X1 is
a standard item supplied with the position display unit.
 Two serial connections
for data transmission:
RS-232-C/V.24
(X31) and USB type B (UART, X32)
 Switching inputs and outputs at D-sub connection X41
for
automated tasks
 2.5 m long power cable with European plug
 Quick Reference Guide
Optional accessories
 Encoder module for connecting a HEIDENHAIN encoder with
11 µApp
, 1 Vpp or EnDat (purely serial) interface for a second
axis X2
 Analog module as input assembly X1 and/or X2 for an analog
sensor with ±10 V voltage interface, preferably a temperature
sensor for axis-error compensation
 Ethernet module (100baseT) for network connection via TCP/IP
protocol
 Mounting base for installation in a 19-inch electrical cabinet
 Various adapter cables with D-sub connector for HEIDENHAIN
encoders
 Length gauge with D-sub connector
 Data transmission cable for RS-232-C/V.24 interface
 Data transmission cable for USB interface
Fig. II.1 Connections
X1 X32/X31