Output format of the parameter list, First line, Second line – HEIDENHAIN ND 287 User Manual User Manual
Page 117: Subsequent lines for the individual parameters, Last line
ND 287
117
II – 7 Input and output of par
a
met
e
r list and er
ro
r
compensation table
Output format of the parameter list
First line
Each parameter list output begins with the start character < # > (HEX:
0x23).
Second line
Model of position display unit and unit of measure
Subsequent lines for the individual parameters
Example:
Last line
Each parameter list output ends with the final character < # > (HEX:
0x23).
#
1
1
Start character and end of line: 3 characters
N D -
2 8 7
1
D E G
2
3
4
2
Model of display unit, left-aligned: 13 characters
3
Unit of measure: 6 characters
4
End of line: 2 characters
P 0 1
L I N E A R
=
5
6
7
8
5
Parameter designation left-aligned and text right-aligned: 19 characters
6
Separator block: 3 characters
7
Parameter value, right-aligned: 13 characters
8
End of line: 2 characters
For parameter P98, the parameter value can be more than 13 characters long!
#
9
9
Final character and end of line: 3 characters