Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 79)

Install prerequisite files on the control point PC
Some software components, such as those for Aurora products, share common prerequisite software.
You must install a prerequisite software package on the control point PC to make the prerequisite
software available for software deployment to devices.
1. Check release notes for the required version of prerequisite files, if any.
2. On the SiteConfig control point PC, open Windows Add/Remove programs and look for Grass
Valley Prerequisite Files , then proceed as follows:
• If the required version of prerequisite files is installed, do not proceed with this task.
• If prerequisite files are not installed or are not at the required version, proceed with this task.
3. Procure the required prerequisite software installation file. The file name is Prerequisite
Files.msi .
4. On the SiteConfig control point PC, run the installation file. The installation program copies
prerequisite files to C:\Program Files\Grass Valley\Prerequisite Files .
18 November 2010 K2 SAN Installation and Service Manual 79
Setting up the K2 SAN infrastructure