Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 107)

7. To modify planned settings, do the following:
a) Select the network settings and click Edit .
The Edit IP Address dialog box opens.
b) Edit IP address settings as follows:
For network interface Control Connection Setting...
Control is required Network
Static is recommended. Address Allocation
The IP address for this interface on the network. Required. IP Address
For network interface FTP Connection Setting...
Streaming is required Network
Static is required. Address Allocation
The IP address for this interface on the network. Required. IP Address
For basic SAN K2 Media Server any network interface of type iSCSI Setting...
iSCSI (non-Redundant) is required Network
Static is required. Address Allocation
The IP address for this interface on the network. Required. IP Address
For redundant SAN K2 Media Server A any network interface of type
iSCSI Setting...
iSCSI (Primary Redundant) is required Network
Static is required. Address Allocation
18 November 2010 K2 SAN Installation and Service Manual 107
Planning and implementing a K2 SAN with SiteConfig