Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 234)

2. Log in to the K2Config application with the Windows administrator account. By default this is
as follows
• Username: Administrator
• Password: adminK2
The K2Config application opens.
3. In the K2Config application tree view, verify that the K2 SAN has the correct number of clients,
according to your system design.
If the correct number of clients is not currently added to the K2 SAN, you can add or remove
clients now (before clients are configured), as follows:
• To add a client, select the top node of the storage system and click the Add Device button.
• To remove a client, select an unconfigured client and click the Remove button.
4. Select the top K2 client.
5. Click the Configure button.
The configuration wizard opens to page 1.
NOTE: If your system has a large number of K2 clients and other iSCSI clients, you are prompted
to restart the K2 Media Server when you configure clients and cross the following thresholds: 64
clients; 80 clients; 96 clients.
Configure page 1 - K2 client
1. Enter the IP address or network name for a K2 client, as currently configured on the K2 client.
You should configure your highest bandwidth K2 clients first, as this ensures load balancing is
correct.
234 K2 SAN Installation and Service Manual 18 November 2010
Configuring clients on the K2 SAN