Grass Valley K2 Summit Storage Area Network Installation User Manual
Page 345
8. Click
Edit Preset
.
The Setup dialog box opens.
9. Locate the Average Bitrate setting. If desired, you can change the bitrate.
10. Locate the FTP path setting. This specifies the Import Watch Folder K2 bin, which is the bin
that receives the incoming clips. By default this is set to bin
default
. If desired, you can set this
to a different K2 bin.
11. Do one of the following:
•
If you did not change any settings and you are able to use the preset with all default settings
intact, click
Cancel
.
•
If you changed a setting, click
Save As
and save the preset using a different name, but retain
a similar naming convention. Making a copy of the provided K2 preset in this way keeps the
original preset with default settings intact for future reference. Make sure the renamed preset
is selected before proceeding.
12. Click
Update
and
OK
.
13. On the Setup dialog box, for Target Folder click
Browse
and then select
SourceFiles
.
14. Click
OK
,
Update
, and
OK
to save settings and close.
18 November 2010
K2 SAN Installation and Service Manual
345
Working with the K2 Coder