Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 227)

Configure FTP Server Configuration page - K2 SAN server B
This page appears only if the server has the role of FTP server.
Do not modify these settings. Leave at default values of Max FTP streams = 4 and FTP Data Socket
Timeout = 60. Only qualified Grass Valley personnel should specify other values, as these settings
are intended for use only with custom systems designed by Grass Valley.
1. Click Next .
The Completing the Configuration Wizard page opens.
2. Click Finish .
The wizard closes. The server restarts.
Wait until all startup processes have completed before continuing.
Next, check the V: drive
Check the V: drive
Prerequisites:
• The K2 Media Server is configured
• The restart of the K2 Media Server after it is configured is complete
This task is required for NAS server functionality.
1. Verify that the K2 Media Server has restarted by opening the MS-DOS command prompt and
use the “ping” command.
18 November 2010 K2 SAN Installation and Service Manual 227
Configuring and licensing the K2 SAN