Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 342)

If you are importing on the K2 Coder:
1. Make a copy of the Import Watch Folder template, as follows:
a) In Carbon Admin, on the Watch Folder tab, right-click ImportWatchFolderTemplate and select
Clone .
A copy of the template is created.
b) Select the copy of the template and click Edit Watch .
The Carbon Watch Folder Setup dialog box opens.
c) In the Name field, remove “Copy of” and “Template” from the name as follows:
ImportWatchFolder
In steps later in this procedure, you configure and use this Watch Folder as the active Import
Watch Folder.
d) Click OK to save settings and close.
e) On the Watch Folder tab for ImportWatchFolderTemplate un-check the check box in the
Active column.
f) On the Watch Folder tab for ImportWatchFolder make sure that the check box in the Active
column is checked.
Making a copy of the provided Import Watch Folder template in this way keeps the template
with default settings intact for future reference.
342 K2 SAN Installation and Service Manual 18 November 2010
Working with the K2 Coder