Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 61)

If you have more Expansion chassis than those illustrated, continue the indicated cabling pattern,
alternating connections for additional Expansion chassis between DP1 and DP0. Expansion chassis
1, 3, 5, 7, etc. (odd numbers) connect to DP1. Expansion chassis 2, 4, 6, 8, etc. (even numbers)
connect to DP0. For example, if you have four Expansion chassis (an even number), they are evenly
balanced, so you have two connected to DP1 and two connected to DP0. If you have five Expansion
chassis (an odd number), the “plus one” Expansion chassis is always connected to DP1, so you have
three connected to DP1 and two connected to DP0.
K2 RAID for redundant nearline K2 SAN
These cabling instructions apply to the following:
• K2 RAID (Condor with 10G controllers) on a Nearline K2 SAN.
18 November 2010 K2 SAN Installation and Service Manual 61
Cabling K2 SAN devices