Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 102)

8. To modify planned settings, do the following:
a) Select the network settings and click Edit .
The Edit IP Address dialog box opens.
b) Edit IP address settings as follows:
For network interface Control Team Setting...
Control is required Network
Static is recommended. Address Allocation
The IP address for this interface on the network. Required. IP Address
For basic SAN network interface Media Connection #1 Setting...
iSCSI (non-Redundant) is required Network
Static is required. Address Allocation
The IP address for this interface on the network. Required. IP Address
For redundant SAN network interface Media Connection #1 Setting...
iSCSI (Primary Redundant) is required Network
Static is required. Address Allocation
The IP address for this interface on the network. Required. IP Address
For redundant SAN network interface Media Connection #2 Setting...
iSCSI (Secondary Redundant) is required Network
Static is required. Address Allocation
The IP address for this interface on the network. Required. IP Address
102 K2 SAN Installation and Service Manual 18 November 2010
Planning and implementing a K2 SAN with SiteConfig