Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 51)

Turn to these instructions: Of this model or
platform… To cable this K2 SAN device…
29xx HP GigE switch for redundant nearline K2 SAN on page
55
HP 2910 Gigabit Ethernet Switch
Dell R610 NH10GE for redundant nearline K2 SAN on page
58
Dell R610 NH10GE K2 Media Server
K2 RAID for redundant nearline K2 SAN on page 61 K2 10G RAID K2 RAID
Cable K2 client
As directed by the system diagram for your K2 storage, cable the K2 client devices using the
instructions in this section.
Related Links
K2 Summit Production Client for basic K2 SAN on page 51
K2 Summit Production Client for redundant K2 SAN on page 51
K2 Summit Production Client for basic K2 SAN
These cabling instructions apply to the following:
• K2 Summit Production Client on a basic (non-redundant) online or production K2 SAN
Refer to the K2 Summit Production Client Quick Start Guide for additional cabling details.
C1 C2 C3 C4
!
OK
~AC
!
OK
~AC
SDI IN 1 SDI OUT 1 SDI OUT2 LTC I/O
AESAUDI O RS422
SDI OUT1 SDI OUT 2
USB/1394 100BT/1000BT
GPI
VGA REF. LOOP THROUG H
AESAUDI O RS422
LTC I/O SDI IN 2 SDI IN 3 SDI IN 1 SDI IN 2 SDI IN 3 SDI IN 1 SDI OUT 1 SDI OUT2 LTC I/O
AESAUDI O RS422
SDI OUT1 SDI OUT2
AESAUDI O RS422
LTC I/O SDI IN 2 SDI IN 3 SDI IN 1 SDI IN 2 SDI IN 3
To control port
on GigE switch
To media (iSCSI) port
on GigE switch
K2 Summit Production Client for redundant K2 SAN
These cabling instructions apply to the following:
• K2 Summit Production Client on a redundant online or production K2 SAN
Refer to the K2 Summit Production Client Quick Start Guide for additional cabling details.
18 November 2010 K2 SAN Installation and Service Manual 51
Cabling K2 SAN devices