Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 156)

Configure New K2 System page 3 - Redundant K2 SAN
1. Review the information on this page and verify that you have correctly defined your K2 SAN.
For a 10G basic K2 SAN you should have the following:
• One Gigabit Ethernet switch
• One K2 Media Server
• Optionally, one or more NH K2 Media Servers
• The number and type of clients appropriate for your system.
2. Click Finish .
The Define New K2 Storage System wizard closes.
Your K2 SAN appears in the tree view of the K2Config application.
Next, configure the server.
Configuring server A - Part 1
1. In the K2Config application tree view, select [K2Server1] .
2. Click the Configure button.
The Configure K2 Server wizard opens to the Define server roles page.
156 K2 SAN Installation and Service Manual 18 November 2010
Configuring and licensing the K2 SAN