Grass Valley K2 Summit Storage Area Network Installation - Manual (Page 346)

15. Do one of the following:
• If you import SD only or HD only, configuration is complete. Skip the remaining steps in
this procedure.
• If you import both SD and HD, continue with this procedure.
In a step earlier in this procedure you configured the Import Watch Folder for SD. Now you
must create a second Import Watch Folder and configure it for HD, as explained in the following
steps.
16. Using Windows Explorer, create the following folder:
V:\K2Coder\HDSourceFiles
17. Make a copy of the Import Watch Folder template, as follows:
a) In Carbon Admin, on the Watch Folder tab, right-click ImportWatchFolderTemplate and select
Clone .
A copy of the template is created.
b) Select the copy of the template and click Edit Watch .
The Carbon Watch Folder Setup dialog box opens.
c) In the Name field, remove “Copy of” and “Template” from the name and add “HD”, as
follows:
HDImportWatchFolder
In steps later in this procedure, you configure and use this Watch Folder as the active HD
Import Watch Folder.
d) Click OK to save settings and close.
e) On the Watch Folder tab for ImportWatchFolderTemplate un-check the check box in the
Active column.
f) On the Watch Folder tab for HDImportWatchFolder make sure that the check box in the
Active column is checked.
Making a copy of the provided Import Watch Folder template in this way keeps the template
with default settings intact for future reference.
18. In Carbon Admin, on the Watch Folder tab select HDImportWatchFolder and click Edit Watch .
The Carbon Watch Folder Setup dialog box opens.
19. In the tree view under Target File, right-click the current preset and select Delete .
20. In the tree view under Target File click Add .
21. Under Preset, click Browse .
The Preset Editor opens.
22. In the tree view, select System , then in the list select the HD K2 preset you want to use.
23. Click Edit Preset .
The Setup dialog box opens.
24. Locate the Average Bitrate setting. If desired, you can change the bitrate.
346 K2 SAN Installation and Service Manual 18 November 2010
Working with the K2 Coder